Detrum Z3-FPV Fpv airplanes Flight Controller OSD 3in1 & PMU
Detrum Z3-FPV Fpv airplanes Flight Controller OSD 3in1 & PMU

Detrum Z3-FPV Fpv airplanes Flight Controller OSD 3in1 & PMU


Out of Stock.

Frequently bought together

Detrum Z3 FPV is a flight controller for radio controlled airplanes. The flight data, including altitude, speed, voltage, position and distance are displayed in real time on screen. The PMU (power management unit) that supports 2-6S battery takes  battery voltage and current data and send signals to the OSD screen.

The controller supports five flying modes. 1. The RTH mode allows the aircraft to return to the take-off point safely under any circumstances; 2. Under normal stability-enhancing mode, the stability of flight can be fully improved; 3.  Safe mode allows the aircraft to fly at a fixed altitude and directional stability; 4. Aerobatics mode can lock the flight attitude to meet the aerobatic pilots needs; 5. Off mode (manual mode) allows the pilot to control the aircraft completely autonomously. And it can automatically switch back to the self-driving mode when the remote control signal is lost or out of control, allowing the aircraft to return to the take-off point safely.

Z3-FPV uses the original lever mode to enter the horizontal calibration, the triggering method is simple, there is no need to connect a computer.



OSD Information Display Function: Real-time Monitoring of Flight Data

Through the built-in OSD, the airplane altitude, speed, position and distance are shown on the screen. Together with Detrum Blitz-DT9 Transmitter and RXC9M receiver, it can return real-time voltage, altitude, speed, attitude, distance, satellite signal and other information to the transmitter in real time, with voice broadcast and record the maximum & average value of information after the aircraft landed for analysis.



Independent PMU: Stable Power Supply

The PMU supports 2-6S, can provide stable power supply (5V) for flight control, camera and other equipment, and can collect current and voltage of the battery

One-click RTH & Fail Safe: The Guarantee of Safe Flight

Toggle the remote control RTH switch when required, the aircraft will maintain the current altitude(By default, when manually returning home, the aircraft will climb to 60 meters when the altitude is lower than 60 meters, and lower to 120 meters when it is higher than 120 meters.), and the autopilot will return to the take-off point side by side-waiting for you to regain control of the aircraft (The default circle radius is 50 meters). Parameters such as return speed and hovering radius can be set in the programming card according to the properties of the aircraft.


With out-of-control protection function (DSM, S.BUS receiver is activated automatically, PPM receiver needs to set out-of-control protection), when the aircraft flies out of the remote control range or the signal is bad, Z3-FPV flight control will automatically take over the aircraft. The height is kept at 100 meters and the airplane flies back to the take-off point and circle (circling radius 50 meters) waiting for you to regain control of the aircraft. 

Compatible with Most Receivers on the Market

Z3-FPV is compatible with Spektrum, Futaba, Detrum and all other transmitters on the market, and supports DSM, S.BUS, PPM receivers. By connecting with Detrum’s programming card, it is convenient for parameter setting and simple and intuitive operation. When working with Blitz-DT9 and RXC9M receivers, it can transmit real-time information such as voltage, altitude, speed, posture, distance, satellite signals, etc. to the transmitter. All data are recorded, including the maximum value and average value of information after the aircraft landed for analysis.