TomBee
150 is a 150-sized racing quad, which mainly consists of integrated power and
control system and carbon fiber airframe. It is a small and fast racer with
high integrated design. It is integrated with Detrum RXC6 reciever, OSD module,
5.8G video transmission and flight controller. Equipped with 800TVL 3-megapixel
mini camera and searchligth, can provide users with perfect FPV visual
experience. TomBee 150 also supports the third-party receiver which can meet
users' need fully.
What are included
TomBee
150 racing drone, motors, ESCs, integrated Detrum RXC6, flight controller, 5.8G
video transmission, 4S 850mAh Li-Po battery and charger, GAVIN-6C transmitter
What are required
1 hour
assembly time
Specifications
Aircraft
Flight
Controller: Detrum F3 flight controller (with integrated OSD)
5.8G
Transmitter: DVT58 25mW/200mW
Brushless
Motor: Tomcat 1806-3100KV
Brushless
ESC: TomBee 150 25A ESC
Recommended
Battery: 500mAh~ 850mAh 3S Li-Po or 500mAh~850mAh 4S Li-Po
Propeller:
3×3
Supported
RC Receiver: Spektrum, S.Bus, XBus, SumD, SumH, PPM, PWM
Firmware:
Cleanflight-Configurator 1.2.4 or earlier and Betaflight-Configurator
Flight
Time: 7 mins (standard), depends upon battery and flight style
Working
Temperature: -10?-40?
Weight:
210g (without battery)
Flight Camera
Lens:
3MP, 2.5mm
Angle:
20°~40°
Horizontal
Resolution: 800TVL
Video
Standard: PAL/NTSC
Sensor:
CMOS
Power
Input: 3.5V~6V
DVT58 Transmitter
Working Frequency:
5.8GHz ISM
Output Power:
25mW/200mW
Channel: 48CH
Antenna Connector:
50O SMA
Video band Width:
8MHz
Video Format:
NTSC/PAL