Dynam P-51 Mustang V2 Fred Glover 1200mm Wingspan - PNP
Dynam P-51 Mustang V2 Fred Glover 1200mm Wingspan - PNP

Dynam P-51 Mustang V2 Fred Glover 1200mm Wingspan - PNP


Out of Stock.

Frequently bought together

The new P51D Mustang by Dynam is a true scale aircraft and comes with pre-installed electronic retracts. The stunning look makes this super realistic in the air and taxiing on the ground. The P51D is an aircraft that is super stable and capable of maintaining flight at super slow speeds that allow novice to master flight mechanics with ease. It will easily take off from any smooth surface on its scale landing gear and made from a high strength EPO-foam for added durability. Powered by a high powered electric brushless motor provides a thrilling flight of over 50mph for up to 8-12 minutes.

What are included:

Dynam P51D airplane, motor, ESC, 6*9g servos

What are required:

6-Channel or above transmitter

6-Channel receiver

3S 11.1v 2200mAh Li-Po 20C battery and charger

1 hour assembly time


Material: EPO Foam

Wing Span: 1200mm(47in)

Flying Weight: 1100g

Wing Loading: N/A      

Fuselage Length: 1000mm(39.4in)

Center of Gravity: 70 - 75mm from the leading edge at the wing root

Motor: Detrum BM3715A-KV890

ESC: TC Skylord 30A ESC

Propeller: 4-Blade Scale Prop

Servo: 6x 9g

Elevator: Yes

Rudder: Yes

Ailerons: Yes

Flaps: Yes

Landing Gear: E retract

Dynam P51 mustang V2 Fred Glover scheme
What a sweet plane. I carved out a little foam. Balanced with a 3s 3000mah lipo, and a little weight. She flies like a trainer. Likes to land on one wheel though. After a bit of aileron and rudder work, she settles right in
Did you find this helpful?  5 of 5 Found Helpful
Reviewed by: (Verified Buyer)  from Carlisle. on 6/2/2018
I ordered this after watching a few youtube videos about it, she looks real fun to fly and will handle windy days with minimal problems. It went together easily so I didn't need to read the manual on how to assemble it. I looked just to see where to add the decals. I'll touch it up with some red paint. My nitpicks are with the motor and esc. apparently it was backwards when I tested the motor and the blades were pushing air forward and out, not to the wings for lift. that was quickly fixed. There were spots where I had to add some foam glue just to have a good seal. that way when I fly it won't fall apart in the air. I will need an 8 - 10 channel receiver for lights and other things. I guess those additions could be FPV gear... I might order the yellow version soon.
Did you find this helpful?  0 of 1 Found Helpful
Reviewed by: (Verified Buyer)  from Fort Riley, KS. on 7/8/2020
There are no reviews for this product!

Reward Points

179 points will be rewarded to you when you buy this item.

The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.