Detrum Z3 for nitro/gas engine is a flight controller for fix wing airplanes, including normal airplanes, delta wing airplanes and V-tail airplanes. It connects to the receiver on the airplane to provide the flight control to facilitate the pilot. Together with Detrum Blitz DT-9 and RXC9M system, the telemetry function provides real time flight information, including, attitude, speed, altitude, distance, satellite reception. Flight information (max, min, average) is recorded and available for pilots to review after the flight is complete.
Adding path control based on the auto-recovery mode, it allows the airplane to automatically plan the path, lead the airplane back to the starting point. Height is controllable during the return flight. You can exit the return mode at any time by waving the return switch, supporting one-button return and signal loss return.
Main Control IC
32-bit high-performance ARM core processor, 6-axis MEMS gyro chipset
Original airplane attitude stabilization algorithm and control algorithm. Support normal wing, fly wing, V-tail airplanes, and 3D planes.
Four flight modes: Gyro off, Normal, Aerobatic, and Auto-Recovery (Auto Balance). You can switch between different modes by the toggle switch.
Adjusting the Gain
Set the gain and other programmable items with 3in1 program card.
Support PPM, S.BUS, S.UBS2, DSM2 and DSMX receivers
32-bit ARM core processor
6-Axis Gyro,Barometric Pressure,GPS
Gyro Scale Range
-2000dps ~ +2000dps
Accelerometer Scale Range
-4g ~ +4g
4.8V ~ 7.4V
-20? ~ 70?