ISTONE-A PRO
is a 6-axis Gyro & Stabilizer for airplane, suitable for normal wing,
fly-wing, and V-tail airplanes. It is used to connect with the receiver to
control the flight, supports Gyro Off, Normal, Aerobatic, and Auto-balance
(Safe) modes, compatible with S.BUS and PWM receivers. You can set the
programmable items via SET button and LEDs.
Compared
to ISTONE-A ACRO, ISTONE-A PRO adds an Auto-balance (Safe) Mode. When switch
the airplane to Safe Mode from any other modes in an emergency, the airplane
will recover to the level flight automatically, which it is known as one-click
rescue. This mode is suitable for the new beginners or the FPV (First Person
View) applications.
What
are included
ISTONE-A PRO
Stabilizer, 3-signal wire, anti-shock double sided tape, single-signal wire
What
are required
5~12 minutes assembly
time
Specifications
Main
Controller: 32-bit MCU
Sensor:
6-axis gyro
Gyro Scale
Range: -2000dps ~ +2000dps
Accelerometer
Scale Range: -4g ~ +4g
Input
Signal: PWM, S.BUS
Output
Signal: PWM (71.4Hz)
Input
Voltage: 4.8V ~ 7.4V
Operating
Temp: -20? ~ 70?
Size:
36.5mm*29.4mm*12.4mm
Weight:
11g
